BF04

Outdoor luminaire with direct light street optic, designed to use LED lamps. Optical assembly made of die-cast aluminium, with dual phosphorous – chromium plating of the base metal, passivation at 120°C, RAL 9007 grey liquid paint, curing at 150°C; possibility of adjusting, even using a graduated scale, the angle relative to the road surface by ± 15°. Diffuser sealed with silicone to PMMA body with 3 mm thickness, 50 Shore black silicone gasket. Thediffuser and frame close the optical assembly at the bottom. The lower frame and cover are fixed together by 4 captive screws. The high IP class is guaranteed by the 60 Shore grey silicone seal interposed between the two elements. Slots in the frame allow rainwater drainage. Complete with circuit having 39 monochrome LEDs in Neutral White (4000K) colour, optics with plastic lens. Control gear connected with quick-coupling connectors and fixed to the body by 2 screws. Driver with automatic inner temperature control system and 4 preset operating profiles (default cycle 100%) which can be selected using microswitches. Operating cycles can be customised using dedicated software which can be transferred using the USB interface (available upon request). Selv 220 - 240V ac 50/60 Hz electronic ballast. The optical assembly is fixed to the wall-mounting or pole-top attachment by two fixing screws. Two safety bolts make it easy to fit. The light flow emitted in the upper hemisphere of the Lavinia System in the horizontal position is null (in conformity with the strictest standards for the prevention of light pollution). All screws used are made of stainless steel.

The floodlight can be installed on a pole (even with an arm), with single, double or triple pole-top attachment (ø 102/120 mm), or it can be wall-mounted. Versions with poles for burial and with base plate. Installation on pole with arms, made of hot galvanised steel coated with acrylic liquid paint, using a flange with ø 102/120 mm (for all poles).;

Standard EN60598-1 “The luminaire technical characteristics conform to EN60598-1 standards and particular requirements”