BF99
Colour
Technical Data
last update: 02/07/2026Description
Diffused light luminaire, designed to use Warm White LED lamps, for recessed wall-mounting (using moulding element accessory). Consists of a component holding box, frame and diffusing screen. The die-cast aluminium outer frame is treated with liquid acrylic paint with a high level of weather and UV ray resistance. The prismatic protective screen is made of thermoplastic material. The perimeter seal is made of EPDM. The component holding plate is housed in the polycarbonate box. Printed circuit complete with 3x1.2W 3100K LEDs. All external screws are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
Diameter (mm)
ø95
Shape
Round
Recessed hole dimensions (mm)
ø70
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
49.91
W system
4.5
lm source
262
W source
3.5
Luminous efficiency - lm/W (system value)
11.09
lm in emergency mode
-
Maximum intensity (cd)
42
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
19
Optic and beam angle
Floor Washer
Adjustability
fixed
Colour temperature
3200 K
MacAdam Step
3
Lifetime LED 1
50,000h - L70 - B20 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
For recessed wall-mounting using screw anchors. Hole diameter 70 mm, recessed depth 82 mm. With the possibility of using a disposable polystyrene moulding element (code 0047) which can be inserted in the formwork to produce the cavity for the luminaire in cast concrete, or for a smooth luminaire compartment in masonry.;
Mounting
Wall recessed
Wiring
Complete with electronic control gear 100-240Vac 50/60Hz.
Notes
Upon request version available with Neutral White 4200K LEDs, code BF98