BG17

Floodlight for use with metal halide lamps, superspot optic. Consists of an optical assembly and component-holding base. The optical assembly, arm, base and frame are made of aluminium alloy EN1706AC 46100LF, with dual phosphochromating of the base metal and passivation at 120 °C. Coated with liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 4 mm thick tempered sodium-calcium closing glass is colourless, transparent and secured with captive screws. The 50/60 Shore A silicone seal has been subject to post-curing treatment, in an oven, for 4-6 hours at 200 °C. The optical assembly allows vertical and horizontal adjustments, with the possibility of locking the adjustment for aiming, and it has slots in the frame for rainwater drainage. The optic has an annealed 99.96% super-pure aluminium plate reflector, degreased - polished and electrochemically anodised, 2/4 microns. The cable gland for connecting the wiring assembly to the lamp assembly is made of nickel-plated brass M11x1. The luminaire comes complete with a terminal for a through earth cable and is set up for through wiring using two PG11 black polyamide cable glands, suitable for cables with a diameter of between 6.5 and 11.5 mm. All external screws used are made of A2 stainless steel.

Can be installed in the ground, floor, wall-mounted (using Fischer fixings) and on branches.;

Accessories available: refractor, wall washer screens, stake for fixing to the ground, belt for applying to branches and various installation accessories.