.jpg)
BH57
Colour
Technical Data
last update: 25/08/2026Description
Post-mounted luminaire for lighting residential exteriors, featuring a double optical assembly, designed to use LED lamps. The optical assembly consists of a diffuser screen made of patterned glass and internally painted, fixed on the polycarbonate supporting plate by means of a die-cast aluminium outer frame. Silicone (sulphur-free) seal interposed between screen and plate. Complete with multi-LED power circuit in Warm White 3100K fixed on anodised aluminium supporting plate. The compartment housing the LEDs has IP55 protection. Equipped with grey polyamide PG9 cable clamp suitable for cables with diameter D=7.5-9.5mm. The two luminaires are fixed to the post by two special painted polycarbonate connecting arms. The post is made of extruded aluminium, the upper part closed by a die-cast aluminium cover with neoprene seal. The post is fixed to the ground using a special aluminium anchoring base. Treated with liquid acrylic paint with a high level of weather and UV ray resistance. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
225x150x1100
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
957.45
W system
22
lm source
750
W source
8.7
Luminous efficiency - lm/W (system value)
43.52
lm in emergency mode
-
Maximum intensity (cd)
111
Total light flux at or above an angle of 90° (Lm)
113
Light output ratio (LOR)
64
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI 82 - Rf (Colour Fidelity Index) 82 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
>50,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Fixed to the floor using a special aluminium base. Fixing plate with anchoring bolts for application in concrete to be ordered separately;
Mounting
Ground anchored
Wiring
Control gear complete with electronic ballast IP67, 200-240V ac ±10%, 50/60Hz and double quick-coupling connector suitable for 2x4mm2 cables.
Notes
Product complete with LED lamp.