.jpg)
BH76
Colour
Technical Data
last update: 25/08/2026Description
Outdoor floodlight designed to use metal halide discharge or high pressure sodium lamps (150W HIT-HST Rx7s) with asymmetrical optic. Die-cast aluminium body and frame, with epoxy powder coating, colour grey RAL 9007. 5 mm thick tempered glass joined to the frame with silicone. The frame is fixed to the body using stainless steel screws with anti-loosening system. Reflector made of super-pure aluminium subjected to anodic oxidation and polishing. Component-holder box separate from lamp box. Control gear with power factor correction, galvanised iron control gear supporting plate, porcelain lamp holder. Mains connection to components unit via PG13.5 cable clamp made of rip-stop nylon (cable minimum ø 1.5mm, max. ø 2.5mm). The floodlight can be adjusted +90° relative to the horizontal axis using a steel bracket. All external screws are made of stainless steel.
Dimensions
General (mm)
475x270x173
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
150
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
8542
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
69
Optic and beam angle
A - Asymmetrical ɣ=25°
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
U-shaped bracket;
Mounting
U-bracket
Wiring
Luminaire with electromagnetic control gear.