BK30
Colour
Optional accessories
Technical Data
last update: 02/12/2025Description
Direct light outdoor floodlight, designed to use warm white LED lamps, with light blade optic. Ground, wall or ceiling installation using special adjustable bracket. The luminaire consists of an optical assembly, rear cap and adjustable bracket. The optical assembly and rear cap are made of die-cast aluminium alloy coated with liquid acrylic paint (grey finish) or textured liquid (white finish) with a high level of resistance to weather and UV rays. The light blade optic lens is made of a two-component material (acrylic and polycarbonate), joined to the optical assembly with silicone. Adjustable fixing bracket made of painted aluminium; with a double nickel-plated brass PG11 cable gland, suitable for power cables ø 6.5-11 mm. For electrical connection the product has a plastic box with three 2-pin quick-coupling terminals for cables with max. cross-section 4 mm². Electronic circuit with warm white LED. Equipped with electronic ballast Vin=100-240V ac 50/60Hz. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Dimensions
General (mm)
81x81x86
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.92
Material
Aluminium
Product certification
-
BIS -
BVB Byggvarube- dömningen -
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
64
W system
7.7
lm source
800
W source
6.1
Luminous efficiency - lm/W (system value)
8.31
lm in emergency mode
-
Light output ratio (LOR)
8
Optic and beam angle
Light blade
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 86 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
For wall-mounting with the special aluminium base. Secure using screw anchors for concrete, cement and solid brick. Product can be installed with the light beam in any direction (up, down, right, left, slanting, etc.).;
Mounting
Wall arm, Wall surface
Wiring
Equipped with electronic ballast Vin=100-240V ac 50/60Hz. Polyamide PG11 double cable gland for pass-through wiring, suitable for power cables ø 6.5-11 mm.
Notes
Product complete with LED lamp.