FRA9

Apparatus consisting of a body made of die-cast aluminum, fitted with a cover glass fixed to the frame. The optical diffuser is fitted with silicone to PMMA body with 4 mm thick, to ensure the seal against the ingress of liquids. Suitable apertures on the frame allow rainwater runoff. The device is equipped with two cable glands (M24x1, 5) to allow through-wiring. MaxiWoody is adjustable in the vertical plane by means of a bracket with a graduated scale to step 10 °, provided with mechanical locks which ensure the stable pointing of the light beam. The horizontal aiming is done by a fixing plate to the ground, equipped with holes and slots, as well as the ground application is meant to apply to wall with fisher. The protocol for assembly and maintenance Maytag, simplifies installation. Thanks to a decompression valve, access to the optical compartment is simple as it is canceled the internal depression. Complete circuit 84 led power monochrome in Cool White (6000K), optics with plastic lens. Uninterruptible power supply, connected with quick connectors, fixed to the body by 2 screws. Driver with automatic control temperature and with 4 predefined operation profiles (default cycle 100%) and selectable via DIP switches, possibility of personalized operation cycles with dedicated software via USB interface (on request). Electronic ballast selv 220-240Vac 50/60Hz. The painting process is performed with the use of acrylic paint (maximum protection to UV radiation of sunlight) type liquid (maximum protection against atmospheric agents).

The fitting can be ground or wall mounted by means of the supporting bracket to be fixed by fischer screws. It can also be installed in the Multiwoody system.;

Available accessories: refractor for elliptical distribution of the light flow, coloured filters, visor, directional flaps, individually adjustable flap louver, round louver, protection grid, ground anchoring plate, and accessory retention cable. Whenever large-body Maxiwoody is not installed to the ground, e.g. in pole / wall / ceiling installations and in installations on buildings etc., strengthening bracket art.6175 must be used.