.jpg)
FTF9
Colour
Technical Data
last update: 25/08/2026Description
Luminaire designed to produce direct light with LED light sources and spot optic. The body is made of extruded aluminium EN1706AC 46100LF subjected to phosphochromatisation treatment with double primer and passivation at 120°C. The die-cast aluminium end caps are complete with silicone gaskets 50/60 Shore A and are subjected to post-cooling (oven) system 4/6 h at 200°C. The liquid acrylic paint is baked at 150°C and ensures high resistance to the external environment and UV rays. The top of the optical assembly is closed by a hardened transparent colourless soda-lime glass screen (4 mm thick) fixed by silicone and complete with a plate with power LED. Optic with lens in plastic material. The product comes equipped with a plastic-material translucent filter. Nickel-plated brass cable clamp PG11 for single entry of power supply cable. All external screws are made of stainless steel A2.
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
Power Supply
Electronic Control gear included
Mounting options
Remote
Dimmable option
Dimmable
Installation
Description
Wall installation by means of brackets and arms that can be extended and adjusted ± 90°. Ceiling installation by means of plate for ceiling or surface application, suspension cables and rigid rods.;
Wiring
Electronic control gear inside the fitting 220 ÷ 240V 50 ÷ 60 Hz.
Notes
Complete with lamp. On request available with LED cool white (6700K), red, green and amber.