JBM7
Colour
Optional accessories
Technical Data
last update: 08/11/2025Description
Floor or ground-recessed luminaire designed to use RGBW LED lamps with a dimmable DMX512-RDM, a search and addressing function for lighting, a fixed and a built-in electronic ballast. The non-slip surface (class R13 compliant in accordance with DIN 51130) is15mm thick and has an inner screen made of opal methacrylate. The stainless steel body is painted black. The luminaire is fixed to the outer casing using two Torx type screws that hold it in place. The unit comes complete with LED circuit. An external black plastic box (PPS) contains the control gear. The product's wiring system features an A2 stainless steel cable gland with a 500 mm long A07RNF type 5x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable and positioned in the control gear box. An outer casing is available for installation and can be ordered separately from the plastic optic assembly. The glass unit, optical assembly, frame and outer casing together guarantee a maximum static load resistance of 5000 kg. The maximum surface temperature of the glass is less than 40°C.
Dimensions
Diameter (mm)
ø250
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
4.5
Material
Stainless steel
Product certification
-
CCC S&E -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
657.5
W system
25.5
lm source
2630
W source
25
Luminous efficiency - lm/W (system value)
25.78
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
658
Light output ratio (LOR)
25
Optic and beam angle
D - Diffused light
Adjustability
fixed
Colour temperature
RGBW - 4000K K
Lifetime LED 1
90,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -20°C a +35°C. (*)
Inrush current
10 A / 200 µs
Minimum dimming
1
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Dimming mode
CCR
Control
DMX-RDM
Installation
Description
The product is fixed to the outer casing using two Torx type securing screws. The unit can be floor-recessed using the outer casing for installation or ground-recessed without the outer casing.;
Wiring
Product complete with dimmable DMX512-RDM driver located inside the device and 220÷240V ac electronic control gear positioned in a box separate from the optical assembly, with an output cable.
Notes
IP68 rating on both the product and the cable using IP68 connectors. The product is not suitable for installation in swimming pools and fountains. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7) Overvoltage protection: 4kV Common Mode, 3.5kV Differential Mode