.jpg)
PF74
Colour
Optional components
Technical Data
last update: 10/07/2026Description
100 W DALI dimmable constant voltage electronic power supply - Vout 48 V PWM.
Product features include short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
225x43x30
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.18
Product certification
-
EAC -
ENEC pending
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Total light flux at or above an angle of 90° (Lm)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Maximum number of luminaires of this type per minature circuit breaker
B10A: 6 power supply units
B16A: 11 power supply units
C10A: 11 power supply units
C16A: 18 power supply units
Overvoltage protection
2kV Common mode & 1kV Differential mode
Inrush current
44 A / 258 µs
Minimum dimming (%)
1
Supply voltage
48 V DC
Power Supply
Electronic Driver included
Mounting options
Integral
Control
DALI-2
Frequency
0/50/60 Hz
Installation
Description
Consult the luminaire instruction sheet to see how many products you can connect.
Fitted with slots for fastening with screws, if required.
Wiring
Input and output terminals on opposite sides (cable cross-section up to 1.5 mm2).
Cable clamp on primary side+DALI and cable clamp on secondary side.
Notes
A switch-dim control can also be used as an alternative to DALI.
Standard: EN 62386-101 / 102 / 207 (including part 251, 252, 253).
Compatible products
This accessory can be used with the following products: