.jpg)
PG40
Colour
Technical Data
last update: 22/04/2026Description
DALI constant current dimmable power suppy I=200 mA 10 W. Input Vin=220÷240 Vac 50÷60 Hz. SELV output. Product features include short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
166x30x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.12
Product certification
-
EAC -
BIS pending -
CCC Pending -
ENEC pending
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Total light flux at or above an angle of 90° (Lm)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Maximum number of luminaires of this type per minature circuit breaker
B10A: 81 power supply units
B16A: 130 power supply units
C10A: 135 power supply units
C16A: 221 power supply units
Overvoltage protection
2kV Common mode & 1kV Differential mode
Inrush current
5 A / - µs
Minimum dimming (%)
1
Power Supply
Electronic Driver included
Mounting options
Integral
Control
DALI-2
Frequency
0/50/60 Hz
Installation
Description
Check the height required for the assembly (see the luminaire instructions sheet).
Fitted with slots for fastening with screws, if required.
Wiring
Input and output terminals on opposite sides (cable cross-section up to 1.5 mm2).
Cable clamp on primary+DALI and secondary. The power supply is fitted with a cable and fast-connector to make the connection to the luminaire easier.
Notes
SELV, EL
Compatible products
This accessory can be used with the following products: