.jpg)
Q370
Colour
Optional components
Technical Data
last update: 02/08/2026Description
Initial profile in extruded aluminium - Minimal (frameless) version for flush with ceiling mounting and up-down emission; methacrylate opal lower screen (diffused general light); screen set up for connecting several lengths by overlapping. Methacrylate diffusing screen for upper emission. Light flow split into approx. 70% down / 30% up.
Dimensions
General (mm)
3594x91x105
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.5
Material
Aluminium and technopolymer
Photometric data
Details
lm system
17384.83
W system
182.7
lm source
26750
W source
160
Luminous efficiency - lm/W (system value)
95.16
lm in emergency mode
-
Maximum intensity (cd)
4413
Total light flux at or above an angle of 90° (Lm)
5151
Light output ratio (LOR)
65
Optic and beam angle
GL - general lighting
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
>50,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
Charts and polar curves
Electrical data
Operating ambient temperature range (C°)
ZVEI code
LED
Installation
Description
Installation can be pendant-mounted using suitable accessories to be ordered separately. The initial modules can be used individually for various applications if completed with accessory caps and the required LED module.
Mounting
Wall surface, Ceiling pendant
Wiring
Set up to house the up-down LED modules required by the system.
Notes
Take care with the system configuration. To make continuous lines of lighting, use the intermediate modules. To complete a continuous line correctly there must always be an initial module at the start or end of the composition.