.jpg)
SQ71
Colour
Technical Data
last update: 05/08/2026Description
Cover base for power supply and control plate fitted with a Libera element with a lux/motion sensor for DALI-2 systems.
A swivel joint with an end cap and pass-through cabling is connected to the Libera element with a sensor. This allows open and closed polygonal compositions to be created.
Complete with power and pendant cables L=3000 mm and a millimetric cable adjustment system.
To be completed with a power supply plate, to be ordered separately.
Technical performance
Complies with EN60598-1 and pertinent regulations
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Total light flux at or above an angle of 90° (Lm)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Power Supply
Electronic control card included
Mounting options
Integral
Control
DALI-2 sensor
Installation
Description
For the correct positioning of the base that determines the position of the sensor, refer to the instruction sheets or contact iGuzzini.
Notes
This code is compatible with the power supply plates for the 35-60-100 and 150 W DALI-2 system sensor.
For DALI-2: the motion and/or daylight control function must be operated through a DALI-2 controller system/app programmed for this purpose. Contact iGuzzini for the systems compatible with the DALI-2 sensor.
Compatible products
This accessory can be used with the following products: