X580

Art-Net / SPI (Serial Peripheral Interface) Gateway with 8 x SPI outputs with 1024 channels, totalling 8192 channels.
Synchronous type communication (Data, Ck), that allows high speeds to be reached - up to 60fps*- and improves the definition of dynamic effects. 8 x output ports with RJ45 sockets on the front. Each output can operate a max line of 21 m of Underscore InOut Pixel (256 RGBW "dots"). Rear side, 1 x Ethernet port is available with RJ45 for connecting the Art-Net signal (DMX over Ethernet). Equipped with a warning LED and test button for each output port. The 3 rotating switches on the front enable bytes to be set that are less important than the assigned IP. The Gateway includes an auto-addressing function for the sequential patching of each SPI output. An onboard micro-SD memory allows shows to be recorded so they can be used in stand-alone mode, in the event of a Gateway being applied as the only control device.
At the back 4 x inputs and 4 x digital outputs are available for triggering options.
The gateway must be powered with an iGuzzini range 24-48 Vdc power supply unit. Absorbed power 30 W.

On the 19-inch rack (1U)
- 24-48 Vdc power supply connector on rear side.
- 1 x Ethernet RJ45 communication port for Art-Net on rear side.
- 8 x SPI RJ45 output ports on front (GND/DATA/CLK/BAL).
- Maximum approximate distance from SPI output to first luminaire = 100 m using the PD18 item code and Cat.≥6 Ethernet cable.;

Supplied with a micro-SD card.
(*) The maximum speed depends on the number of pixels and the system architecture