.jpg)
XB97
Colour
Technical Data
last update: 04/05/2026Description
0/1-10V dimmable electronic power supply from 13 to 32 W. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output 350 mA.
Accepts 0-10V and 1-10V type adjustment. For connection with the control units, consider a sink current of 0.35 mA. For connection with potentiometers, consider a value of 100 kOhm. Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
103x67x21
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.1
Product certification
-
CCC Pending -
ENEC pending
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
4kV Common mode & 3kV Differential mode
Inrush current
5 A / 50 µs
Minimum dimming
1
Control
0-10V
Frequency
50/60 Hz
Installation
Description
Fitted with slots for fastening with screws, if required.;
Wiring
Input and output terminals on one side only (cable cross-section up to 1.5 mm2).
Cable clamp included for cables with a diameter of: min. 3 mm - max. 8 mm.
Notes
To set the current and for the minimum and maximum quantities of luminaires that can be connected to this power supply, consult the reference product instruction sheet.
Double insulation can be guaranteed by connecting 0/1-10V external command components.
Compatible products
This accessory can be used with the following products