.jpg)
XC01
Colour
Technical Data
last update: 08/07/2026Description
Constant current non-dimmable electronic ballast I=650 mA 28 W. Input Vin=220÷240 Vac 50÷60 Hz. SELV output. The product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
147x44x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.1
Product certification
-
CCC Pending -
ENEC pending
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
3kV Common mode & 2kV Differential mode
Inrush current
5 A / 50 µs
Power Supply
Electronic Driver included
Mounting options
Integral
Control
On/off
Frequency
50/60 Hz
Installation
Description
Positioned on top of or inside electrical boxes. Fitted with slots for fastening with screws, if required.;
Wiring
Input and output terminals on opposite sides (cable cross-section up to 1.5 mm2).
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 10 mm.
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 10 mm.
Compatible products
This accessory can be used with the following products