.jpg)
XC81
Colour
Technical Data
last update: 13/04/2026Description
0/1-10V dimmable electronic power supply from 13 to 32 W. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output 1050 mA.
Accepts 0-10V and 1-10V type regulation. For connection to control units, consider a sink current of 0.35 mA. For connection to potentiometers, consider a value of 100 kOhm. Product features include overvoltage protection, short circuit protection, overcurrent and over-temperature protection.
Dimensions
General (mm)
103x67x21
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
CCC Pending -
ENEC pending
Electrical data
Power Supply
Electronic Driver included
Mounting options
Integral
Control
0-10V
Installation
Description
Equipped with slots for possible fixing with screws.;
Wiring
Input and output terminals on one side (cable section up to 1.5 mm2).
Cable clamp included for cables with diameter: min. 3 mm - max. 8 mm.
Notes
To verify the minimum and maximum quantities of devices that can be connected to the power supply and to know if the wiring can take place from the recessed hole or from a remote location, refer to the instruction sheet of the lighting device.
Compatible products
This accessory can be used with the following products