.jpg)
SV10
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional components
Technical Data
last update: 25/06/2026Description
Outdoor bollard installable on ground and floor, designed for the use of LED sources with 360° symmetric optics. The complete product consists of an optical compartment with attachment and a cylindrical bollard to be ordered separately. The optical compartment is composed of: painted aluminum top cover, PMMA flux recuperator, plexiglass emitting lens, aluminum textured collar, silicone gasket for watertight seal and power supply. The aluminum parts undergo a multi-step pre-treatment, where the main phases are degreasing, fluorozirconating (surface protective layer) and sealing (silane nano-structured layer). The subsequent painting phase is carried out with primer and liquid acrylic paint, baked at 150°C, which provides high resistance to atmospheric agents and UV rays. The compartment is supplied with an outgoing cable L=100mm to be connected to the power supply via a connector. The optical system is complete with a circuit with Warm White monochromatic LEDs. All external screws used are made of stainless steel.
Dimensions
Diameter (mm)
ø180
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.86
Material
Aluminium
Photometric data
Details
lm system
953.4
W system
13.2
lm source
2270
W source
10
Luminous efficiency - lm/W (system value)
72.23
lm in emergency mode
-
Maximum intensity (cd)
255
Total light flux at or above an angle of 90° (Lm)
6.96
Light output ratio (LOR)
42
Optic and beam angle
360° distribution
Adjustability
fixed
Light colour quality
CRI 82 - Rf (Colour Fidelity Index) 77 - Rg (Gamut Index) 102
Colour temperature
2700 K
MacAdam Step
3
Electrical data
Operating ambient temperature range
from -30°C to 50°C.
Power factor
See installation instructions
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 luminaires
B16A: 50 luminaires
C10A: 52 luminaires
C16A: 85 luminaires
B10A: 31 luminaires
B16A: 50 luminaires
C10A: 52 luminaires
C16A: 85 luminaires
Overvoltage protection
0kV Common mode & 0kV Differential mode
Inrush current
5 A / 50 µs
Minimum dimming
2
ZVEI code
LED
Installation
Description
Pole to be purchased separately. The product can be installed either by expansion anchors with screws or by counterplate with tie rods.;
Mounting
Free standing
Wiring
Connectors to be purchased separately
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories