ST69
Colour
Optional accessories
Technical Data
last update: 01/12/2025Description
Product for linear lighting - with white monochromatic LED with high colour rendering - made on a white flexible circuit. External protection in transparent silicone sheath with end caps. IP65 protection rating for the strip with full length (not sectioned). The ends of the circuits are equipped with connectors with IP20 protection rating, therefore the installer is responsible for adapting the connectors to the insulation. Supplied in 5-metre reels wrapped in special supports; a connection kit for in-line or power connections is included in the package. The strip can be sectioned at 50 mm intervals; in case of intermediate cuts, make sure to carefully seal the cut ends to restore the protection conditions. LED characteristics: white colour 2700K - CRI 90 - 160 LED/m - 120° opening angle - 25 W total - 24 V power supply. Power supplies to be ordered separately. The LED strip features a pre-applied high-adhesion 3M backing tape, ensuring secure and long-lasting attachment to clean, smooth surfaces, and allowing for easy, tool-free installation..
Dimensions
General (mm)
5018x10x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.27
Material
Technopolymer
Product certification
-
CE -
UK Conformity Assessed -
ENEC pending
Photometric data
Details
lm system
3175
W system
25
lm source
W source
Luminous efficiency - lm/W (system value)
127
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
145
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 90 - Rf (Colour Fidelity Index) 93 - Rg (Gamut Index) 99
Colour temperature
2700 K
MacAdam Step
2
Lifetime LED 1
50,000h - L80 - B10 (Ta 25°C)
Electrical data
Voltage
24 DC
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Installation
Description
fixing kit: clips (code MWG2: 10 pieces) and rigid aluminium support (code MWG1: 5 pieces x 1 m) - The strip is designed to be combined with all Underscore 15 profiles;
Mounting
Wall arm, Ceiling surface
Wiring
ON-OFF and Dimmable power supplies to be ordered separately. For compatibility, check the instruction sheet.
Notes
For correct heat dissipation, it is recommended to use the strip in combination with the available profiles. The prepared connectors guarantee an IP20 protection rating. If the strip is cut (in the prepared areas), it is recommended to carefully restore the seal after performing the connection welds