.jpg)
SV21
Colour
Optional components
Technical Data
last update: 27/05/2026Description
Outdoor luminaire with a Wide Flood optic, designed to use LED RGBW lamps. Consists of an optical assembly with a base and an aluminium alloy frame. The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. 5 mm thick colourless transparent tempered sodium-calcium closing glass. Product can be tilted on the vertical plane by +5°/-90° with a 10° step graduated scale and fitted with mechanical blocks that guarantee stable light beam aiming. Horizontal aiming can be adjusted using the slots on which the base is provided with a ±30° adjustment option.
High visual comfort. High yield, homogenous light distribution polymer optic lenses. Circuit complete with single chip RGBW LEDs (Red Green Blue and White LEDs) and a DMX512-RDM electronic check driver . Removable control gear connected with quick-coupling connectors. 220-240V ac 50/60Hz electronic ballast. Replaceable control gear. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
296x214
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
5.45
Product certification
-
BIS pending
Photometric data
Details
lm system
W system
lm source
890
W source
12
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Optic and beam angle
WF - Wide Flood 40°
Adjustability
directional
Colour temperature
RGBW K
Electrical data
Operating ambient temperature range
from -20°C to +35°C. (*)
Power factor
See installation instructions
ZVEI code
LED
Dimmable option
Dimmable
Control
DMX-RDM
Installation
Description
The luminaire can be installed on the wall or floor using a standard base.
.;
Mounting
Surface mounted, Ground surface, Wall surface
Wiring
Luminaire ready for pass-through wiring. Product perfect watertightness at the power cable entry point is guaranteed by 2 x M24x1,5 nickel-plated brass cable glands suitable for cables with a max external ø14mm (cross-section from 1.5mm²). Push in terminal board.
Notes
The following are available as accessories: refractor for elliptical light flow distribution, diffusing glass, visor, directional flaps, protective grille.