.jpg)
SV22
Colour
Optional components
Technical Data
last update: 27/05/2026Description
Outdoor luminaire with a SuperSpot optic, designed to use RGBW LED lamps. Made up of an optical assembly with a base and an aluminium alloy frame. The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. With a 5 mm thick colourless transparent tempered sodium-calcium glass cover. The product can be tilted by +5°/-90° around the vertical plane with a 10° step graduated gauge and fitted with mechanical blocks that guarantee stable aiming of the beam of light. Horizontal aiming is performed using the slots in the base, which allow an ±30° adjustment.
High visual comfort. Polymer optic lenses offering high yield and even light distribution. Circuit complete with single chip RGBW (Red, Green, Blue and White) LEDs and a DMX512-RDM electronic control driver. Extractable control gear connected with quick-coupling connectors. 220-240V ac 50/60Hz DALI electronic ballast. Replaceable control gear. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
296x214
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
5.45
Material
Die-cast aluminium
Product certification
-
BIS pending -
ENEC pending
Photometric data
Details
lm system
W system
lm source
890
W source
12
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Optic and beam angle
SS - SuperSpot 13°
Adjustability
directional
Colour temperature
RGBW - 4000K K
Electrical data
Operating ambient temperature range
from -20°C to +35°C. (*)
Power factor
See installation instructions
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
DMX-RDM
Installation
Description
The luminaire can be installed at ground level or on walls using the standard base.;
Mounting
Surface mounted, Wall surface, Ground anchored
Wiring
Luminaire ready for pass-through wiring. Product perfect watertightness at the power cable entry point is guaranteed by 2 nickel-plated brass M24x1.5 cable clamps, suitable for cables with a max external 14mm ø (1.5mm² cross section). Push in terminal board.
Notes
Available accessories include: a refractor for elliptical light flow distribution, diffusing glass, visor, directional flaps, protective grille .