BJ32
color
Accesorios opcionales
Datos técnicos
Última actualización: 07/11/2025Descripción
Direct light luminaire, designed to use RGB LED lamps (Red, Green, Blue), 48V dc with DMX512-RDM control. Ceiling- and wall-mounted. Consists of a body, a box for DMX driver and supports for installation (to be ordered separately). Extruded aluminium body and side box, with zamak die-cast end caps complete with silicone seals. Coated with liquid acrylic paint with a high level of weather and UV ray resistance. The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in RGB (Red, Green, Blue), side box with 48V dc DMX512-RDM electronic driver (ballast to be ordered separately). Side box with double PG13.5 cable gland and outlet cables for pass-through wiring. Fitted with a PMMA diffusing filter and optics with plastic (methacrylate) lens for Wall Grazing lighting. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensiones
General (mm)
1496x91x39
Rendimiento técnico
Complies with EN60598-1 and pertinent regulations
Propiedades físicas
Weight (kg)
2,87
Material
Aluminio extruido
Certificación del producto
-
BIS -
QCERT -
CCC Pending
Datos fotométricos
Detalles
lm system
1572,35
W system
38,6
lm source
2665
W source
31
Luminous efficiency (real value)
40,73
lm in emergency mode
-
Light output ratio (LOR)
59
Optic and beam angle
WG - Wall Grazing
Adjustability
fijo
Colour temperature
RGB K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Datos eléctricos
Operating ambient temperature range
da -30°C a 50°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electrónico Equipo de control no incluido
Dimmable option
Dimmable
Control
DMX-RDM
LED Current
300
Instalación
Descripción
The following accessories are available for installation: adjustable wall-mounted arms in AISI304 stainless steel ( 200mm code BZJ8) and a plate for surface- or ceiling-mounting made of anodised aluminium (BZJ7).;
Mounting
Superficie de pared, Superficie de techo
Wiring
The product is equipped with a nickel-plated brass PG13.5 double cable gland with H07RN-F rubber outlet cables 5x1.5mm2 for pass-through wiring: each cable is set up both for the DMX-RDM signal and for 48V dc power supply. Available for electrical connection: IP68 5-pin linear connector (BZS6), cap for IP68 connectors + 120 Ohm terminating resistor (BZQ7), 48V dc DIN bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16). DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)
Notas
Product complete with LED lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)