BT34
color
Accesorios opcionales
Datos técnicos
Última actualización: 07/11/2025Descripción
Direct light luminaire, designed to use Warm White monochrome LED lamps, and a Wall Grazing optic. Ground-, wall- and ceiling-recessed. Consists of a body and outer casing for installation, to be ordered separately. Extruded aluminium body, with die-cast aluminium end caps complete with silicone seals. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. Lower PPS (polyphenylene sulfide) box for control gear. The top of the optical assembly is closed by a 8mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in Warm White with 48V dc electronic circuit (ballast to be ordered separately). 48V intelligent driver that ensures light flow emission is constant even when the input voltage varies . Fitted with a PMMA diffusing filter and optics with plastic (methacrylate) lens for Wall Grazing lighting. The lower box has two PG11 nickel-plated brass cable glands for Ø6.5÷11mm cables used for pass-through wiring. To fix the optical assembly to the outer casing or false ceiling the product has a quick coupling system using an Allen key. Outer casing for installation made of aluminium with technopolymer covers, to be ordered separately. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensiones
General (mm)
1044x55x74
Shape
Rectangular
Recessed hole dimensions (mm)
1026x43x75
Rendimiento técnico
Complies with EN60598-1 and pertinent regulations
Propiedades físicas
Material
Aluminio extruido
Certificación del producto
-
BIS -
QCERT -
CCC Pending
Datos fotométricos
Detalles
lm system
1065,4
W system
28,4
lm source
1910
W source
25
Luminous efficiency (real value)
37,51
lm in emergency mode
-
Light output ratio (LOR)
56
Optic and beam angle
WG - Wall Grazing
Adjustability
fijo
Light colour quality
CRI (minimum) 80
Colour temperature
2700 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
66,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Datos eléctricos
Operating ambient temperature range
da -30°C a 50°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electrónico Equipo de control no incluido
Mounting options
Remoto
Dimmable option
Dimmable
Control
PWM
Instalación
Descripción
Ground- and wall-recessed using the outer casing, to be ordered separately. For ground installation a drainage channel must be created or gravel inserted for drainage under the outer casing before installation, to guarantee the degree of protection stated.
For ceiling-mounting with plasterboard panels (1-30 mm thick), make the preparation openings as indicated in the instructions sheet and use the accessory with code X013 (kit containing steel cables with reinforcement plates).;
Mounting
Empotrado en pared, Empotrado en el techo, Empotrado en el suelo
Wiring
Equipped with a 48V dc electronic circuit fitted inside the device. 48V dc electronic ballasts to be ordered separately. For the electrical connection the product has a lower box holding two quick coupling terminals (3-pole, max. 4 mm2) and double cable glands for pass-through wiring.
Notas
Product complete with LED lamp. The frame, glass, optical assembly and outer casing together guarantee a maximum static load of 1000 kg.