.jpg)
2003
Colour
Technical Data
last update: 25/08/2026Description
Made of die-cast G Al Si 2 UNI 5076 aluminium and painted with epoxy powders with orange peel finish. The gallery is fixed to the pole by means of a female coupling and blocked in place with three stainless steel bolts. The coupling system is for diffusers without collar. The optical assembly guarantees IP 45 degree of protection.
Dimensions
Diameter (mm)
ø500
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
125
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
373
Total light flux at or above an angle of 90° (lm)
93.58
Light output ratio (LOR)
36
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HME
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
On all poles with 60 mm diam. ending part.;
Mounting
Poletop bottom entry
Wiring
The electrical group is housed inside the aluminium gallery on a supporting plate with: lampholder, ignitor, ballast, and terminal block. The gallery is also provided with capacitor. Compliant with European regulations EN40, CEI34-31 and CEI 34-33.
Notes
500 mm diam. polycarbonate diffuser (code 2127).