.jpg)
2015
Colour
Technical Data
last update: 25/08/2026Description
Gallery designed for the use of 600mm-diam. globes. It is made of G AI Si 2 UNI 5076 die cast aluminium treated with epoxy power paint with orange peel finish. The gallery is fixed to the bracket with a male shank and blocked with three stainless steel screws and anti-loosening device. The lower part of the shank has a hole with a cable clamp provided with an anti-incision device. The diffuser neck has three teeth that ensure a perfect airtight fixing through a silicone gasket and thus the IP 45 degree of protection of the optical assembly.
Dimensions
Diameter (mm)
ø500
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
6.7
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
56
Total light flux at or above an angle of 90° (lm)
11.67
Light output ratio (LOR)
40
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HSE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
The gallery is fixed to the bracket with a male shank and is blocked with three stainless steel screws with anti-loosening device.;
Mounting
Poletop bottom entry
Wiring
The electrical group is housed inside the aluminium gallery on a supporting plate for lampholder, ignitor, ballast, terminal board. The gallery can also house a capacitor. In compliance with the EN40, CEI34-31 and CEI 34-33 European standards.