.jpg)
2702
Colour
Technical Data
last update: 25/08/2026Description
Spotlight for interior lighting designed for use with discharge lamps. It is made up of a die-cast aluminium body equipped with safety glass, seal and outer rim. The optical assembly can be rotated on the vertical plane by a joint with screw locking system to guarantee stability of the luminous flux and on the horizontal axis thanks to the rotating rod that connects the luminaire to the adapter for electrified track. The optical assembly houses the superpure aluminium reflector and the lampholder, whose position can be adjusted from outside the fitting to calibrate the opening of the light cone (focusing device).
Dimensions
Diameter (mm)
ø140
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
15533
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
55
Optic and beam angle
M - Medium 16°
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HIT
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Electronic ballast for discharge lamps.;
Mounting
Three circuit track
Wiring
Connection to the power supply with adaptor for electrified track.
Notes
A Osram lamp should be used for the best performance of the optics. . Available accessories:Low-brightness screen cod. 1186.