.jpg)
2705
Colour
Technical Data
last update: 25/08/2026Description
Floodlight for interior lighting designed for use with low-voltage bi-pin halogen lamps.It is made up of a die-cast aluminium body equipped with safety glass, seal and outer rim. The body houses the 99.95% superpure aluminium reflector and the lampholder, whose position can be adjusted from outside the fitting in order to calibrate the opening of the light cone from a minimum of 24° to a maximum of 54° (focusing device). The optical assembly can be rotated by 90° on the vertical plane by a cylindrical joint with screw locking system to guarantee stability of the luminous flux and by 355° on the horizontal axis thanks to the rotating rod that connects the luminaire to the adapter for electrified track.
Dimensions
Diameter (mm)
ø85
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2163
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
68
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
12 VDC
Power Supply
Electronic Transformer included
Mounting options
Integral
Dimmable option
Dimmable
Installation
Description
The fitting can be installed on iGuzzini or compatible electrified tracks.;
Mounting
Three circuit track
Wiring
The fitting is complete with electronic transformer 50W 230V +/- 10% with mains frequency 50/60 Hz and dimmer for the adjustment of the luminous intensity. Class of Insulation II.
Notes
Available accessories: Fresnel lens cod.1181, 45° low-brightness screen cod.1182.