Region and Language

Product standard

Your language

3191

Downloads Downloads

Colour

Technical Data

last update: 25/08/2026
Description
Suspended lighting system designed for fluorescent light sources with up/down dark light luminous emission. The product permits down-light-only emission by means of a top cover made of plastic material. Controlled-luminance optic L ≤ 1000 cd/m² for at > 65° suitable for use in environments with VDUs according to standard EN 12464-1. The lamellar optic with bi-parabolic profile is made of anodised specular superpure aluminium. The structure of the fitting is made of galvanised painted sheet-steel; the lamp-holding supports are made of galvanised painted sheet-steel; the end caps are made of polycarbonate. The top protection screen (to be ordered separately) is made of transparent polycarbonate subjected to anti-UV treatment. The power-supply cable is transparent and the cables are subjected to antioxidant treatment. The modules can be combined by means of direct and corner (90°) couplings.
Dimensions
General (mm) 1700x140x40
Technical performance
  • Class I

    Class I

  • Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

    Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Sheet steel
Product certification
  • ENEC-03
    ENEC-03

Photometric data

Details

W source
80
lm in emergency mode
-
Maximum intensity (cd)
721
Total light flux at or above an angle of 90° (lm)
3653.06
Light output ratio (LOR)
93
Optic and beam angle
DK - Dark Light
Adjustability
fixed

Electrical data

Voltage
220-240 VAC
ZVEI code
T 16
Power Supply
Control gear included
Mounting options
Integral
Control
DALI

Installation

Description

Suspended installation. The suspension system (to be ordered separately) has sheet-steel supporting plates with polycarbonate covering bases and steel suspension cables with a millimetric adjustment system (applied to the modules).;
Mounting Ceiling pendant
Wiring The fitting is provided with DALI dimmable electronic ballast and is designed for switch-dim, with possibility of regulation also by means of an ordinary electrical button. The product is designed for through wiring by means of special terminal boards and electrical wires with 1,5 mm2 cross-section housed inside the aluminium profile. The system is designed to switch on three groups of fittings separately. Occupies 1 DALI address.
Subscribe