3192
Colour
Technical Data
last update: 25/08/2026Description
Suspended lighting system designed for fluorescent light sources with up/down dark light luminous emission. The product permits down-light-only emission by means of a top cover made of plastic material. Controlled-luminance optic L ≤ 1000 cd/m² for at > 65° suitable for use in environments with VDUs according to standard EN 12464-1. The lamellar optic with bi-parabolic profile is made of anodised specular superpure aluminium. The structure of the fitting is made of galvanised painted sheet-steel; the lamp-holding supports are made of galvanised painted sheet-steel; the end caps are made of polycarbonate. The top protection screen (to be ordered separately) is made of transparent polycarbonate subjected to anti-UV treatment. The power-supply cable is transparent and the cables are subjected to antioxidant treatment. The modules can be combined by means of direct and corner (90°) couplings.
Dimensions
General (mm)
1700x140x40
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Sheet steel
Photometric data
Details
lm system
W system
lm source
W source
35
Luminous efficiency - lm/W (system value)
lm in emergency mode
232
Maximum intensity (cd)
721
Total light flux at or above an angle of 90° (lm)
1960,2
Light output ratio (LOR)
93
Optic and beam angle
DK - Dark Light
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
T 16
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral
Installation
Description
Suspended installation. The suspension system (to be ordered separately) has sheet-steel supporting plates with polycarbonate covering bases and steel suspension cables with a millimetric adjustment system (applied to the modules).;
Mounting
Ceiling pendant
Wiring
The fittings is equipped with T16 35/49/80W Multiwatt electronic ballast with inverter and battery pack for emergency lighting. The product is designed for through wiring by means of special terminal boards and electrical wires with 1,5 mm2 cross-section housed inside the aluminium profile. The special terminal boards designed for REST MODE ensure permanent emergency light for 1 hour. The system is designed to switch on two groups of fittings separately.