3261
Colour
Technical Data
last update: 25/08/2026Description
Sheet-steel suspended luminaire designed to use tubular fluorescent lamps. Light sources 2x54 W T16 with colour temperature 2700 K and 6500 K (included). The modules of the luminaire can be assembled by means of linear or angular couplings (90°). Superpure aluminium reflector with professional dark VDU optic. The direct/indirect light system has dimmable electronic digital ballasts DALI that permit regulating the individual light sources with different colour temperatures. Easy installation thanks to a suspension mechanism that uses steel cables adjustable in millimetres (Arakawa system). Electric wiring by means of a five-pole terminal block (T, N, L1, L2, L3) that can start three units separately. A two-pole terminal block is used for the dimming signal. Control electronic unit and control panel (to be ordered separately) needed to operate the system.
Dimensions
General (mm)
1400x240x56
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Sheet steel
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
108
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
1942
Total light flux at or above an angle of 90° (lm)
3769.96
Light output ratio (LOR)
78
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
T 16
Power Supply
Electronic Control gear included
Mounting options
Remote
Installation
Description
Ceiling-mounted by steel suspension cables with hinging system and fast adjustment;
Mounting
Ceiling pendant
Wiring
Wiring by electronic digital ballasts DALI for 54W fluorescent tubes. Fast-coupling terminal block designed for double starting of contiguous modules. Occupies 1 DALI address.
Notes
Positive contrast dark VDU 65° up/down module Lcd/m2. High global performance, relatively wide distribution of the luminous flux. Optics designed to illuminate the offices where VDT work is carried out, with a good uniformity and visual comfort even at high illuminance levels.