.jpg)
4192
Colour
Technical Data
last update: 25/08/2026Description
Floodlight fitted into the floor with body and screws made of A.I.S.I. 304-18-8 polished stainless steel; die cast aluminium ring painted in black; EPDM gaskets against dust and water. Fixed optics made of anodized aluminium. Anchoring box composed of a die cast aluminium ring and a PVC tubolar element. Hardened protective transparent glass resistant up to 5000 Kg. PG13,5 cable clamp. Wiring plate made of galvanized steel.
Dimensions
Diameter (mm)
ø228
Shape
Round
Recessed hole dimensions (mm)
ø180
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Stainless steel
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
4065
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
56
Optic and beam angle
WF - Wide Flood 42°
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Fitted into the floor. The anchoring box is embedded in the ground (check that is flush with the paving) and cement is cast all around so as to provide a gravel layer for a good drainage and a valid seal. Anchoring box diameter 225 mm, height 295 mm.;
Mounting
Ground recessed
Wiring
Wiring for M.H. 70W lamps contained in the body of the fitting. Complete with control gear and capacitor. Possible wiring with two P163 water-tight cable clamps.
Notes
The luminaire should be installed with the outer casing (code 5936), which can be ordered separately.