.jpg)
4198
Colour
Technical Data
last update: 25/08/2026Description
Luminaire fitted into traffic-access roads with body and screws made of A.I.S.I. 304-18-8 polished stainless steel; protective screen made of die cast aluminium painted in black; EPDM gaskets against dust and water. Optics made of pure anodized aluminium. Anchoring box composed of a die cast aluminium ring and a PVC tubolar element. Hardened protective transparent glass resistant up to 2000 Kg. PG13 cable clamp. Wiring plate made of galvanized steel.
Dimensions
Diameter (mm)
ø148
Shape
Round
Recessed hole dimensions (mm)
ø103
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Stainless steel
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
341
Total light flux at or above an angle of 90° (lm)
171.8
Light output ratio (LOR)
29
Optic and beam angle
Ground level lighting from three sides
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
Power Supply
Electromagnetic Transformer included
Mounting options
Integral
Installation
Description
Fitted into the floor. The anchoring box is embedded in the ground (check that is flush with the paving) and cement is cast all around so as to provide a gravel layer for a good drainage and a valid seal. Anchoring box diameter 225 mm, height 225 mm.;
Mounting
Ground recessed
Wiring
Wiring for halogen 50W lamps contained in the body of the fitting. Complete with lamellar transformer. Possible wiring with two P13 water-tight cable clamps.
Notes
The fitting is provided with a protective screen with three openings. Besides acting as a light, it also produces a pleasant graphic effect on the ground. The luminaire should be installed with the outer casing (code 5935), which can be ordered separately.