.jpg)
4294
Colour
Technical Data
last update: 25/08/2026Description
Downlight designed for use with a 2x32W compact fluorescent lamp in the horizontal position. Thanks to its professional optics the luminance of the reflector can be limited to values smaller than 200 cd/sqm with angles of observation greater than 60° with respect to the vertical axis (ref. CIBSE LG3 and DIN 5035 Teil 7 A60). Two brackets made of galvanized sheet steel are fixed to the die-cast aluminium perimetric ring to support the component box, also made from sheet steel. The lamp holder is fixed to the component box, which can be extracted from the fitting for easier maintenance. The superpure aluminium reflector is screwed to the fitting at the bottom.
Dimensions
Diameter (mm)
ø289
Shape
Round
Recessed hole dimensions (mm)
ø212
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
32
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
1148
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
68
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
TC-TEL
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Installation
Description
Holes of 280 mm diameter for recessed installation. The brackets for fastening the support ring can be adjusted through sliders to fit false ceilings 1 to 30 mm thick.;
Mounting
Ceiling recessed
Wiring
Digital dimmable electronic (DALI) ballast designed for two 32W compact fluorescent lamps. Occupies 1 DALI address.
Notes
Dimmable ballast available upon request.