.jpg)
4892
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Projector for interiors made up of reinforced-plastic cradle, lamp-holding ring and diecast-aluminium lamp-holding cover. Application to electrified track by three-phase adaptor. The product comes complete with separate component-holding box fixed to the adaptor close to the track. The mechanical locking system to point the light is placed at one end of the cradle and permits changing the inclination of the projector by about 100° perpendicularly to the horizontal axis. The projector can also be rotated by about 340° around the vertical axis. Several accessories may be installed by a special ring to be ordered separately. IP40 for optical assembly with optional glass diffusers.
Dimensions
Diameter (mm)
ø207
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium and reinforced thermoplastic
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
26533
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
37
Optic and beam angle
S - Spot 12°
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
HIT
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Fitted to electrified track through a three-phase adaptor.;
Mounting
Three circuit track
Wiring
Electronic wiring inside the component-holding box and joined to the adaptor.
Notes
Complete with protection glass.