.jpg)
5175
Colour
Technical Data
last update: 25/08/2026Description
Wall/Ceiling-mounted fitting designed to use fluorescent light sources with asymmetric optic. The optical assembly is made of extruded-aluminium; the screen-holding profile of extruded-aluminium; the end caps of injection-moulded polycarbonate; and the adjustable arms of die-cast aluminium. The fitting is made up of an aluminium base for wall application and an extruded-aluminium internal support plate complete with fast-coupling terminal boards for electrical connection. Liquid painting.Superpure aluminium reflector. The arms can be adjusted by -10°/+90° and the aiming system can be locked in place mechanically.
Dimensions
General (mm)
1200x157x61
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Extruded aluminium
Photometric data
Details
lm system
W system
lm source
W source
54
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
1652
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
81
Optic and beam angle
Adjustability
up/down tilt
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Supply voltage
220-240 VAC
ZVEI code
T 16
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Wall or ceiling installation.
Mounting
Wall surface, Ceiling surface
Wiring
The electronic ballasts are inside the fitting.
Notes
Accessories available: polycarbonate protection screen (IP40) and antiglare louvres (longitudinal cut-off 30°). The protection screen (IP40) can be used together with the louvre.