.jpg)
5835
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Luminaire designed for use with low-voltage 2x50W halogen lamps QR CBC 51. It is made up of a perimetric painted sheet-steel rim and two sheet-steel optical assemblies painted in black. The diecast aluminium optical assemblies can be extracted from the luminaire body through a special slide and a fork supporting the lamp-holding ring. The slide is fixed to a device which rotates around the vertical axis and permits a maximum 190° rotation. A cylindrical hinge in the lower end of the bracket permits a 75° inclination on the vertical plane and the block of the movement by tightening the screws.
Dimensions
Diameter (mm)
ø89
Shape
Rectangular
Recessed hole dimensions (mm)
222x124x170
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
12525
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
12 VDC
Power Supply
Electronic Transformer included
Mounting options
Remote
Installation
Description
Recessed fixing into false ceilings.;
Mounting
Ceiling recessed
Wiring
Connection to the secondary of the transformer, supplied separately, for low-voltage lamps.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used.