Laser Evo
Laser Evo
More
Lander
Lander
More
Laser Evo
Laser Evo
More
Newfo
Newfo
More
Agorà
Agorà
More
Lander
Lander
More
Wireless DALI
Wireless DALI
More
Wired DMX
Wired DMX
More
Sorella
Sorella
More
Polsino
Polsino
More
The Fernand Cina winery tasting complex
The Fernand Cina winery tasting complex
More
A new lighting system for Michelangelo’s La Pietà
A new lighting system for Michelangelo’s La Pietà
More
Laser Evo
Laser Evo
More
Newfo
Newfo
More
Agorà
Agorà
More
Lander
Lander
More
Wireless DALI
Wireless DALI
More
Wired DMX
Wired DMX
More
Sorella
Sorella
More
Polsino
Polsino
More

Region and Language

Product standard

Your language

6654

Downloads Downloads

Colour

Technical Data

last update: 25/08/2026
Description
Aluminium track. Conductors housed inside the interior of the track. Conductors shielded by rigid extruded isolating material that has a very high dielectric resistance. The 3-phase wires with a common ground provide 3 separate circuits that allow the use of 3 distinct switches. Available with 54W T16 fluorescent module for up light emission and DALI control gear.
Dimensions
General (mm) 2000x43x71
Technical performance
  • Class I

    Class I

  • Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

    Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

Complies with EN60598-1 and pertinent regulations

Physical properties
Weight (kg) 4.23
Material Aluminium
Product certification
  • ENEC-03
    ENEC-03

Electrical data

Voltage
220-240 VAC
Power Supply
Control gear included
Mounting options
Integral

Installation

Description

For ceilings. Tracks have fastening supports or can be installed via rods or cables with different lengths which can be fastened to the support joints. The tracks can also be installed at a height of 2.50 m or lower from the floor, in order to place them closer to work spaces.;
Mounting Ceiling pendant
Wiring The electric conductors are such that will allow for the following types of installation: 220/250V: connection to a single phase electricity network of 220/250V allows for a total load of 16 A that corresponds to 3500/4000 V/A, which can be divided onto three circuits. 220/380V: connection to a 3-phase electricity network of 220/380V allows for a total load of 16 A that corresponds to 10500 V/A, and which can be divided into three circuits (3x3500 V/A).

Notes

Tracks come equipped with a series of accessories that supply power to the conductors and allow various tracks and to be joined. This is possible with end caps with power supplies, direct joints, T-joints, cross joints, and L-joints. The joints are all equipped with 5 conductor wires. The lateral position of the grounding wire makes the track structure asymmetrical. Therefore the connecting joints should be chosen by keeping this in mind. Occupies 1 DALI address.
Subscribe