.jpg)
7394
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Outdoor flooflight designed for use with bipin 250 W metal halide dischage lamps. Manufactured from diecast aluminium with a 99.95% superpure aluminium sheet reflector. Aluminium-sheet component-holding plate with stainless-steel screws. The front part has a protective glass covered opening with a silicone sealing gasket which enables access to the optical box. A double PG 11 cable clamp enables the insertion of cables. The angling system is fixed by using locking screws with the help of a graduated scale.
Dimensions
General (mm)
370x250x146
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
250
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
13927
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
65
Optic and beam angle
VWF - Very Wide Flood 72° / 41°
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
On a wall or on the ground thanks to the use of a directable rod (in aluminium) to be fixed using plastic expansion plugs.;
Mounting
Pole-top side entry, U-bracket
Wiring
Ballast and ignitor for 250 W discharge lamp R7s MH inside the fitting. Complete with capacitor.