.jpg)
7473
Colour
Technical Data
last update: 25/08/2026Description
External floodlight for sodium discharge lamps. Made in diecast aluminium with circular optics in 99.98% superpure sheet aluminium with polishing finish. Diecast aluminium lamp-holding compartment joined to the body of the luminaire with no. 4 M4 screws tightened on a silicone seal. Sheet steel component-holding plate with stainless steel screws. The optical assembly is accessed by opening the front door provided with protective glass with silicone seal. The luminaire is provided with double PG11 for through wiring. Aiming system with screw locking device and graduated scale.
Dimensions
General (mm)
431x250x280
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
150
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
53012
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
51
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HST
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Installed to the wall or into the ground by means of aluminium adjustable support bracket fixed with Fischer screws.;
Mounting
U-bracket
Wiring
Ballast and starter for 150W HST discharge lamp. Complete with capacitor.