.jpg)
8000
Colour
Technical Data
last update: 01/08/2026Description
Miniaturized low voltage downlight composed of a die cast aluminium body which holds the lampholder for dichroic lamps. Fixed to a die cast aluminium supporting structure provided with tempered steel hook springs. The body is fixed to the supporting structure with two rotation pins located in decentralized position. The downlights can be rotated by 30° with respect to the vertical axis. The two-part body of the fitting ensures easy lamp replacement. The terminal board is mounted on a bracket located on the body of the fitting.
Dimensions
Diameter (mm)
ø108
Shape
Round
Recessed hole dimensions (mm)
ø100
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Product certification
-
ENEC-03
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
12525
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
tilt-down
Colour temperature
Lifetime LED 1
Lifetime LED 2
Charts and polar curves
Electrical data
Operating ambient temperature range
Voltage
12
Power Supply
Electronic Transformer included
Mounting options
Remote
Installation
Description
Recessed fixing to false ceilings with steel springs. Hole diameter 100 mm.;
Mounting
Ceiling recessed
Wiring
An inductive or electronic 220/12V transformer must be installed near each fitting or at the beginning of the power supply line.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used. The fitting can use the following accessories: coloured glass (code 8658), concentric fresnel lens (code 8672), longitudinal fresnel lens (code 8673); decorative glass (codes 8670 and (8671).