.jpg)
8300
Colour
Technical Data
last update: 25/08/2026Description
Downlight designed for use with 2x7W compact fluorescent lamps in the horizontal position. It is equipped with low-luminance professional optics (ref. CIBSE LG3 and DIN 5035 Teil 7 A60) made from superpure aluminium sheet. Two brackets made of galvanized sheet steel are fixed to the die-cast aluminium perimetric ring to support the component box, also made from sheet steel. The lamp holders are fixed to the component box, which can be extracted from the fitting for easier maintenance. The reflector is screwed to the fitting at the bottom.
Dimensions
Diameter (mm)
ø187
Shape
Round
Recessed hole dimensions (mm)
ø178
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
7
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
215
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
66
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
ZVEI code
TC-S
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Holes of 178 mm diameter for recessed installation. The steel brackets for fastening the support ring can be adjusted through sliders to fit false ceilings 1 to 30 mm thick.;
Mounting
Ceiling recessed
Wiring
Low-loss electromagnetic ballasts designed to accept capacitors (available upon request)