.jpg)
8360
Colour
Technical Data
last update: 25/08/2026Description
Downlight designed for use with L.V. halogen lamp 100W 12V Gy6.35 and equipped with low-luminance professional optics. The superpure aluminium reflector is connected to a perimetric diecast aluminium ring through counter springs. The reflector supports the lampholder and the diecast alumninium heat dissipator with a thermoplastic cover. The fitting has a focusing device which makes it possible to position the lamp with pinpoint accuracy by means of a screw located in the lower part of the reflector.
Dimensions
Diameter (mm)
ø140
Shape
Round
Recessed hole dimensions (mm)
ø125
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
100
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
2616
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
88
Optic and beam angle
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
12 VDC
Power Supply
Electronic Transformer included
Mounting options
Remote
Installation
Description
Recessed installation into false ceilings 1 to 30 mm thick (hole diameter: 125 mm). The fastening brackets are made of steel and can be adjusted for height.;
Mounting
Ceiling recessed
Wiring
Connection to the power supply by fireproof silicone-insulated cable which comes standard with the fitting.
Notes
Bi-pin lamps with a longitudinal filament should be used for the best performance of the optics.