.jpg)
8458
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Low voltage floodlight for indoor lighting made of die cast aluminium. The fitting is composed of a body housing the lampholder and a cylinder housing the light source. The groove located in the lower part of the floodlight can house an aluminium rod which supports coloured glass diffusers. Supplied with an iGuzzini adapter for electrified tracks. The floodlight can be rotated by 330° horizontally and 90° vertically.
Dimensions
General (mm)
89x188x185
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
50
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
8496
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
100
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electromagnetic Transformer included
Mounting options
Integral
Installation
Description
Fitted to an electrified track through the multi-phase adapter and to the wall by base (8773).;
Mounting
Three circuit track
Wiring
Complete with built-in lamellar transformer for 50 W dichroic halogen lamps.
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used. The floodlight can use the following accessories: holder for accessories (codes 8722-8734); glass diffuser (code 8721); coloured glass (code 8704); concentric fresnel lens (code 8705); longitudinal fresnel lens (code 8706); louvre (cod.8708).