.jpg)
8469
Colour
Technical Data
last update: 25/08/2026Description
Spotlight for interior lighting made up of a rear body housing the lampholder and of a front cylinder housing the light source - both made of diecast aluminium. The lower part has a groove where it is possible to insert an aluminium rod to which glass diffusers of various colours may be applied. The base is coupled to the spotlight by means of a diecast aluminium rod permitting its 330° rotation and 90° inclination with respect to the vertical axis.Control gear box made up of a diecast aluminium bearing base with the electrical components for discharge lamps, painted moulded polycarbonate cover resistant to 850° NF C20, aluminium mechanical fixing system with screw and helicoidal spring for correct positioning.
Dimensions
Diameter (mm)
ø150
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
100
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
14912
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
34
Optic and beam angle
Adjustability
rotation and tilt updown
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Supply voltage
220-240 VAC
ZVEI code
HST
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Installation on electrified track by means of multiphase adapter.
Mounting
Three circuit track
Wiring
Complete with U.V. filter and capacitor. The wiring for sodium lamps is located inside a special component-holding box to be applied to the track.
Notes
The following accessories can be used: accessory-holding support (cod.8724), glass diffuser (cod.8721), coloured glass (cod.8712), concentric fresnel lens (cod.8714), longitudinal fresnel lens (cod.8715), louvre (cod.8716), adjustable barn doors (cod.8717), wall-washer screen (cod.8718).