.jpg)
8564
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Spotlight for interior lighting designed for use with halogen lamps 75W 12V Gy 6.35. It is made up of a die-cast aluminium body equipped with safety glass, seal and outer rim. The body houses an electromagnetic toroidal transformer with thermal cut out and reset. The optical assembly can be rotated on the vertical plane by a joint with screw locking system to guarantee stability of the luminous flux and on the horizontal axis thanks to the rotating rod that connects the luminaire to the adapter for electrified track. The optical assembly houses the superpure aluminium reflector and the lampholder, whose position can be adjusted from outside the fitting to calibrate the opening of the light cone from a minimum of 15° to a maximum of 54° (focusing device).
Dimensions
Diameter (mm)
ø140
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
75
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Maximum intensity (cd)
9496
Total light flux at or above an angle of 90° (lm)
0.48
Light output ratio (LOR)
66
Optic and beam angle
WW - Wall Washer
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electromagnetic Transformer included
Mounting options
Integral
Installation
Description
The fitting is designed for installation on iGuzzini or compatible electrified tracks.;
Mounting
Three circuit track
Wiring
Electromagnetic transformer inside the body of the fixture.
Notes
A bi-pin lamp with a longitudinal filament should be used for the best performance of the optics. Available accessories: Fresnel lens cod.1185 and 45° low-brightness screen cod. 1186.