.jpg)
B035
Colour
Optional components
Technical Data
last update: 25/08/2026Description
Lighting system designed to use double-socket discharge-lamps (Rx7s) CDM-TD and HST-DE. The cast aluminium optical assembly is subjected to a phosphochromate treatment and is then painted with black or grey acrylic paint that is highly resistant to the external environment. Reflector made of polished 99.9% superpure aluminum. The protection screen is made up of a flat hardened glass supported by a die-cast aluminum frame. The high optical performance permits greater centre-to-centre distance between the poles and therefore a reduction in the number of fittings and total power needed. All screws are made of stainless steel. The use of street optics equipped with a flat protection glass makes the product compliant with the strictest regulations on light pollution. There is no light emission from the fitting in the system's upper hemisphere.
Dimensions
General (mm)
830x400x300
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
70
Luminous efficiency - lm/W (system value)
Maximum intensity (cd)
2754
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
73
Optic and beam angle
ST - street optic
Glare Index
G*3
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
HIT-DE
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
Installation on poles with buried base and square base. The poles are painted and made of hot galvanised steel with 70-micron thickness according to standard UNI 5744-66. The dimensions comply with European standard UNI EN 40 and are equipped with a corrosion-proof collar placed close to the area near the ground. The upper closing plug is made of polycarbonate. A special accessory permits applying the fitting to the wall.;
Mounting
Pole arm
Wiring
Control gear for discharge lamps inside the optical assembly.
Notes
IP23 the component holding box