B080

The die-cast aluminium optical assembly has a grey (RAL 9007) liquid painted surface. The injection-moulded polycarbonate diffuser is shock-resistant and is treated against ultraviolet rays. The diffuser (ø=384 mm and h=663 mm) is fixed to the component-holding box by means of a bayonet attachment and four stainless-steel captive screws. The decorative rods of the diffuser are in die-cast aluminium. They are fixed to the optical assembly and need not be removed during installation or maintenance. The optical assembly and the wiring are protected by a silicone gasket. All external screws are made of stainless-steel. The socket, ignitor, ballast and capacitor are fixed to an extractable supporting plate inside the assembly through captive screws. A disconnecting switch with fuse can be inserted upon request. The extractable plate can be replaced by loosening two screws and releasing two quick connectors that ensure connection between the assembly and the supply cable as well as between the optical assembly and the control gear. The supply cable is connected to a terminal block inside a protection box and is fixed by captive screws to guarantee Insulation Class II. A tear-resistant cable clamp can be used too. The control gear is insulated by means of spacers. The components are covered by an injection-moulded plastic casing.

The lighting body is placed downwards (on an arm). It is fixed by four stainless-steel dowels with antiloosening device. The single and double arms are available in various lengths and in the pole-mounted and wall-mounted versions.;

Available accessories: louvre, asymmetrical screen and glass cone. Poles, arms and accessories to be ordered separately.