Region and Language

Product standard

Your language

B691

Downloads Downloads

Colour

Technical Data

last update: 25/08/2026
Description
Diffused-light luminaire designed to use TC-TEL lampsfor emergency operation SA (always on). Emergency operation lasts 1 hour; 12 hours are needed to recharge the batteries. NiCd batteries 3.6V 1.2Ah. Aluminium external frame; polycarbonate square diffuser; PG11 cable clamp. The component-holding plate is included in the polycarbonate assembly complete with protection cover; control gear with fast-coupling 3-pole terminal boards. All screws are made of stainless steel (A2).
Dimensions
General (mm) 300x300x108
Technical performance
  • Class II

    Class II

  • Completely protected against penetration of dust, Protected against waves

    Completely protected against penetration of dust, Protected against waves

  • IK10 - Protected against 20 J shocks

    IK10 - Protected against 20 J shocks

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Die-cast aluminium
Product certification
  • CE
    CE
  • ENEC-03
    ENEC-03

Photometric data

Details

W source
26
lm in emergency mode
182
Maximum intensity (cd)
193
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
28
Optic and beam angle
GL - general lighting

Electrical data

Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
TC-TEL
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral

Installation

Description

Wall-mounted fitting for emergency operation (SA).;
Mounting Surface mounted
Wiring The control gear inside the body of the fitting is made up of extra-low loss electronic ballasts, fast-coupling 3-pole terminal boards, possibility of separate starting for each lamp, silicone cables, radio interference filters.
Subscribe