.jpg)
B702
Colour
Technical Data
last update: 25/08/2026Description
Wall/Ceiling-mounted luminaire designed to use lamps for emergency operation SA (always on). Emergency operation lasts 1 hour; 12 hours are needed to recharge the batteries. NiCd batteries 3.6V 1.2Ah. The polycarbonate assembly comes complete with protection cover, component-holding plate and control gear with fast-coupling 3-pole terminal boards and cable clamp PG11. Die-cast aluminium external frame. The pressed-glass raised diffuser with optic texture is painted inside. All screws are made of stainless steel (A2).
Dimensions
Diameter (mm)
ø355
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Photometric data
Details
lm system
W system
lm source
W source
26
Luminous efficiency - lm/W (system value)
lm in emergency mode
208.08
Maximum intensity (cd)
199
Total light flux at or above an angle of 90° (lm)
26.43
Light output ratio (LOR)
36
Optic and beam angle
GL - general lighting
Adjustability
fixed
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
ZVEI code
TC-TEL
Power Supply
Electronic with inverter Control gear included
Mounting options
Integral
Installation
Description
Wall/Ceiling-mounted fitting for emergency operation (SA).;
Mounting
Surface mounted
Wiring
The control gear inside the body of the fitting is made up of extra-low-loss electronic ballasts, fast-coupling 3-pole terminal boards, possibility of separate starting for each lamp, silicone cables, radio interference filters.