Reset data

EH14

Updating Product Data...

Photometric configuration only available on screens above 1024px

Attention! Code no longer in production. Please use the Code Finder to find the alternative that best suits your needs.

updated

LED
83.8W 9000lm - system values i
System flux (lm): total light flux emitted by the product. System power (W): energy consumption of the product, including power components.
Luminous Efficiency (system value): 107lm/W
3000K CRI 70
Optic: ST1.2 - road optic I = 4h / d = 1,2
Adjustability: up/down tilt
Lm output in Emergency mode: -
Total light flux at or above 90° [Lm]: 0
Light Output Ratio (L.O.R.) [%]: 100
Life Time 1: 100,000h - L90 - B10 (Ta 25°C)
Life Time 2: 46,000h - L90 - B10 (Ta 40°C)

Installation: The floodlight can be installed on a pole (even with an arm), with single, double (ø60/ø76/ø102/ø120mm) or triple (ø102/ø120mm) pole-top attachment, or it can be wall-mounted. Installation on a pole may be flush with 6000 mm, 7000 mm or 8000 mm poles (from iGuzzini), or external (with poles not from iGuzzini). Versions with poles for burial and a base plate. Installation on pole with arms, made of hot galvanised steel coated with acrylic liquid paint, using a flange with ø102/ø120 mm (for all poles) or with screws.
Environment: Outdoor
Wiring: The attachment guarantees the completely safe passage of power cables, avoiding piercing. Overvoltage protection: 10KV Common Mode and 6KV Differential Mode. The product is powered by cables from a pre-wiring box with terminal block and 6.3 A T fuse and resistance to mains voltage peaks up to 10KV (with Varistor). Product perfect watertightness at the power cable entry point is guaranteed by the PG M24x1.5 mm cable gland made of thermoplastic material, thrust ring and rubber gasket, achieving insulation class II.

updated

Do you want to know more?

Search